# PCB Amendment for device/chipflasher-v2

* Use socket for R10, change value to 100 Ohm
* Use socket for R23, change value to 1000 Ohm
* Change C11 from 100nF RCY100 to 10µF 16V Tantalum RCY100P, connect minus to ground
* Change C12 and C13 from 100nF 20% RCY100 to 100nF 10% X7R RCY100
* Change C2 and C4 from 1nF 20% RCY200 to 2.2nF 10% X7R RCY200